Everything About Rockspace Extender Setup

While using the WiFi router, the first thing comes to mind is to have access to WiFi signals everywhere. It is not possible to have the complete WiFi strength with a single WiFi router. There is a need for the extender for the extension of the signal to all over the home. With the Rockspace extender, you can cover more area as compared to the other extenders. Therefore, you must know about the steps for the Rockspace Extender setup. With these steps, you will complete the setup and will have access to the network all over the home. So, there is no need to think twice before doing the Rockspace Extender Setup. This blog has defined all the steps required for completing the setup of the Rockspace extender. So, without explaining it more here, let’s get straight to the steps!

Steps You Need To Follow For Rockspace Extender Setup

There are two methods that you can follow for the Rockspace extender. One is the WPS method, and the other is using the access link. Both the methods are easy at their own places. The only thing is that you can use the WPS setup method only when your main router also has the WPS feature. Otherwise, you have to use the access link for the setup. Though the steps for both the methods are explained here. So first, let’s discuss the steps for the WPS method. 

1. WPS Method For Rockspace Extender Setup

For the WPS method, you should go with the following steps if your main router has the WPS button:

Step 1: First, turn on your Rockspace WiFi extender and wait till the power light turns into a solid color.

Step 2: Next, press the WPS button on your Rockspace extender to start with the setup process.

Step 3: Then, within 2 minutes of pressing the WPS button on the extender, press the WPS button on the router itself. 

Step 4: When the WPS lights turn into a solid color instead of blinking, then it means it is connected. 

Step 5: Once connected, you can unplug your Rockspace extender from the current place.

Step 6: At last, you will connect your extender to the desired place but in the range of the router.

2. Access Link For Rackspace Extender Setup

If your mian router doesn't have the WPS button, then you should go with this method. It is also known as the web browser method. For this, you should go with the  following steps:

Step 1: First, turn on your Rockspace WiFi extender and wait till the power light turns into a solid color.

Step 2: Then, connect your system to the extender’s network using the wireless means or with the wired method.

Step 3: Once it gets connected with the Rockpace extender’s network, then you are all set to open the web browser.

Step 4: Enter the web address as re.rockspace.local in the address field.

Step 5: This will open the login screen for the Rockspace extender. If it has not opened yet, then use the alternative of the IP address i.e. 192.168.0.254.

Step 6: On the opening of the login screen, you need to complete the login with the default credentials.

Step 7: On the successful login, the Rockspace extender will search for the networks present in that particular area.

Step 8: Select the name of your WiFi network from the opened list.

Step 9: Also, enter the password if your main WiFi is password protected.

Step 10: You can also change the name of your Rockspace extender if you want.

Step 11: After completing the setup, and saving the changes, the message will be displayed as “Extended Successfully”.

Step 12: If the LED is blue, then you are in the good range.

Step 13: And, if the LED is red, then you need to bring the extender closer to the router as it was not in the range earlier.

Step 14: Lastly, connect your wireless device to the extender’s network. 

Therefore, these are the ways with which you can complete the setup of your Rockspace extender. So, now you are all set to use your Rockspace extender for the extension of the signal.

What To Do If The Rockspace Extender Is Going Offline After Setup?

What is the benefit of the setup if you will not be able to use it because it is showing the offline status? Well, there can be different reasons behind it. In order to resolve it, you should go with the following steps:

Step 1: Check if you are able to access the extender’s network on the other devices.

Step 2: If not, unplug your extender from the current place, and keep it unplugged for around 60 seconds.

Step 3: After 60 seconds, you can try again to connect to the extender’s network.

Step 4: If still it does not work, and you are not able to access it, then reset your extender. 

Step 5: For this, press the Reset button and keep it pressed for 10 seconds.

Step 6: Restart your Rockspace extender after this, and get connected to it.

So, these are the steps for the troubleshooting of the Rockspace extender. Therefore, if you were not able to connect to your Rockspace extender, then you should go with these steps.

Get Reached With Rockspace Extender!

Summing up! With the Rockspace extender, you can reach the areas which are not earlier accessible. You should complete the setup of the Rockspace extender and should have access to the network in the dead zones. Therefore, with this blog, you can complete the Rockspace Extender Setup as you want with any of the methods. Even if you are getting the status offline for your Rockspace extender, then the troubleshooting steps are also defined. Though, there could be some other as well which needs the expert’s assistance. For this, you should call on a toll-free number, and get all the required help for your problem. So, get the hard to reach areas accessed with the Rockspace extender.