Rockspace Range Extender Setup: A Guide For Network Extension

While using your WiFi network, you must have observed one thing. That one thing is that at some points, the network is good, but at some points, no access to the network. These are the dead zones for the network. To get rid of this, you must complete the Rockspace Range Extender Setup. Moreover, you can cover all the dead zones for the network, because Rockspace extender is able to cover up the range of 1200 Mbps. Therefore, it means you will have a good network strength at every point. Therefore, this blog will be a guide for you to complete the Rockspace Range Extender setup. So, once you complete all the following steps, then you can have access to your network at any point. Therefore, now it’s time to get started with the process.

Steps To Extend Your Network With Rockspace Range Extender Setup

Now, to cover a big area with a single WiFi network, there is a need for the network range extender. The good decision will be to use the Rockspace Range extender to cover up the maximum area. Therefore, you need to go with the following steps to complete the Rockspace range extender setup:

Step 1: Connect your Rockspace Extender to the power source, and turn it on.

Step 2: Wait for the Power LED to get stabled.

Step 3: Next, you need to connect your system with the Rockspace's network.

Step 4: Further, open the web browser, and visit the link re.rockspace.local.

Step 5: This will open the setup page for the Rockspace extender. 

Step 6: Now, you will select the option whether you want to use your extender at the access point or the extender.

Step 7: Select the option of the range extender and follow the setup procedure accordingly.

Step 8: There is no need to worry if the page keeps on refreshing in between during the setup. 

Step 9: You need to apply all the on-screen instructions that you are seeing on the screen.

Step 10: Once you are done with the setup procedure, then the screen will get closed by itself.

Step 11: Now, you can place your extender at the location where it is required. When you place the extender, you need to check the LED.

• If the LED is lighting in blue color, then you have placed the Rockspace extender at the accurate point.
• In case, the LED is lighting in red color, then place the Rockspace extender a bit closer to the router.
• If it is Off, then it is too far from the router, then move it closer to the router till the LED turns blue.

So, in this way, you will complete the setup for the Rockspace Range extender. So, get ready to have access to the network in the dead zone areas.

Bring Life In Dead Zones!

Summing up! When you can’t access the network in the dead zones, then it becomes the point where there is no life. It is so because now everyone’s device is on the wireless network. If it is not accessible then they will not go to that point. So, by completing the Rockspace Range Extender Setup with this guide, you have brought back life in the dead zones. Though the setup process is easy as everything is going to be with the on-screen instructions. In case you are facing any trouble, then you can contact us for help. Our experts will guide you for the solution to your query. So, say no to dead zones as Rockspace extender setup is going to change it into the full-network zones.